Sound but no picture
You can hear the channel and the screen glows faintly if you shine a torch on it.
Usually: failed backlight LED strips or the backlight driver circuitSound but no picture? Dead screen? Blinking standby light? We repair LED, LCD, OLED and Smart TVs at component level in our Samakhusi workshop - which is why our repairs cost a fraction of "you need a new panel".
A large share of the sets we are asked to write off turn out to have a failed power board or backlight strip — not a dead panel. Call 9716826434 before you buy a new television.
Television faults are highly diagnostic — the exact symptom usually narrows it to one board before the back cover even comes off.
You can hear the channel and the screen glows faintly if you shine a torch on it.
Usually: failed backlight LED strips or the backlight driver circuitThe standby LED blinks in a pattern, or the set is completely unresponsive.
Usually: failed capacitors on the SMPS power supply boardVertical or horizontal lines, colour bands, or half the picture missing.
Usually: T-con board fault or a loose panel ribbon connectionEverything looks normal but there is silence, crackling, or sound on headphones only.
Usually: blown speakers or the audio amplifier IC on the mainboardApps crashing, stuck on the logo, Wi-Fi not connecting, or endless reboot loops.
Usually: corrupted firmware, failed memory IC or Wi-Fi moduleSpider-web cracks, black ink blots, or a hard impact mark on the display.
Honest answer: panel damage is rarely economical — we will tell you upfront
Most TV "repairs" in the market are board swaps — pull the suspect board, fit a new one, charge you for the whole assembly. It works, but you pay many times more than the fault is actually worth.
Our engineers work at component level: tracing the failed capacitor, MOSFET, fuse or LED strip on the board and replacing just that part.
LED, LCD, OLED, QLED and Smart TVs from 24" to 85".
Call or use the booking form. Brand, screen size, model number and what you see on screen. A short video helps a lot.
We collect the TV, diagnose it on the bench, then call you with the exact fault and a fixed price. You decide before any work starts.
We run the set for hours to confirm the fix holds, then deliver and reinstall it — with a 90-day written warranty.
We quote after bench diagnosis. These four things decide where the price lands.
Call 9716826434 with the brand and model for an honest estimate before committing.
Unbranded or imported sets too — see how we work.
Workshop in Samakhusi, with free pickup and delivery across the valley.
Almost certainly not. Shine a torch at the screen in a dark room while the TV is on — if you can faintly see the picture, the panel is fine and the backlight has failed. That is one of the most common and most repairable TV faults there is. Many people replace a perfectly good television over it.
A blinking standby LED is the set reporting a fault it detected during startup — most often a voltage problem from the SMPS power supply board. Bulging or leaking capacitors are the usual culprit, and replacing them at component level is an inexpensive repair compared with a new board.
Usually not, and we will tell you that honestly. A replacement panel costs most of the price of a new television of the same size, and the risk during fitting is high. Cracked screens are the one TV fault where we routinely recommend replacing the set rather than taking your money.
Board-level TV repair needs bench equipment — soldering stations, an oscilloscope, a dust-controlled space to open the panel — so we collect the TV and repair it at our Samakhusi workshop. Pickup and delivery are included. Book a collection here.
Typically two to four days including collection, diagnosis, the repair itself and burn-in testing. We deliberately run the set for several hours after repair, because a fault that returns after twenty minutes of warm-up is worse than no repair at all. Parts that need ordering can extend this.
Yes. Boot loops and logo freezes are usually corrupted firmware or a failing memory IC, not a hardware write-off. We reflash the firmware or replace the memory chip and the set boots normally again — far cheaper than a new mainboard.
Get a second opinion first — it costs you nothing. "The panel is gone" is the standard diagnosis when a shop cannot repair boards at component level. A large share of the sets brought to us with that verdict turn out to need a backlight strip or power board repair instead. This is exactly why we exist.
Tell us the brand, size and what you see on screen. If it is worth repairing we will tell you the price. If it isn't, we will tell you that too.
Washing Machine Repair · Fridge Repair · Microwave Oven Repair · About Us · Contact · Home